Red Hot Summer Halter Dress: A Fabricista Post

Dress: DIY Vogue 1546 | Clutch: DIY Self Drafted | Shoe: Sam & Libby for Target (old)

It has happened to all of us a least once right? You see a pattern and you KNOW you have to make it, like ASAP! Well that is the feeling I had about this new Summer pattern from Vogue.

As soon as I saw Vogue 1546 I knew I had to have this pattern as well as a few others (see here for my thoughts on the whole collection). The unique design of this dress really grabbed by attention. I love the halter neckline, the back cut out and the full pleated skirt… all of it! So while I originally had something else in mind for this months post I quickly ditched those plans to make this dress.


The pattern calls for medium weight twill, poplin or linen, so I immediately thought to use Fabric Mart’s amazing designer linen. I have used this linen before (see here) and I knew it would be the perfect texture and weight. For that reason selecting the fabric was the easy part, the tricky part was deciding on a color! I mean, come on, there are 23 colors to choose from! At first I was going to go with bright orange just like the envelope model is wearing (we’re about the same complexion so I thought why not?), then cycled through the avocado (because I’ve wanted to use it for a while), purple (because it is one of my favorite colors) and sunflower (because it looked so summery!) Obviously I decided on this bright red because it is one of my favorite colors and my husband loves it on me.


On to the sewing…at first glance the pattern looked a tad advanced and I was surprised Vogue categorizes it as average. However after constructing the dress I realized Vogue was right, there was nothing in the construction of  this dress that I had not done before. I read over the instructions more closely than usual and followed them for particular steps however as typical for me, I constructed the dress all out of order.


I wasn’t sure what size to cut as my actual measurement are 38″, 35″, 42″ give or take and I fell between a 16 and a 18. I decided to start with the lining to test the fitting. I often do this as to not waste my main fabric if I’m wrong and if all goes well my lining is done! I graded from a size 16 at the shoulder and bust to a 18 at the waist and hip. When I test fit the front bodice and skirt I decided the 18 was about 1/2″ too large and decided to cut the 16. At that point I took in the skirt and discarded the front bodice (as it is to be self lined).

1. Attach one side of zipper to right side of back band
2. Place band lining of band RSF
3. Pin lining piece to band and zipper
4. Sew around the bottom, side and top of back band leaving side open for turning

The bodice is simple and I think you could use lining fabric if you prefer as long as it is close in color and you press your garment well and understitch to ensure the lining doesn’t peek out. The back band was simple as well though I veered away from the pattern instructions to eliminate any hand sewing. After attaching the zipper to the right side of the band band the instructions have you fold over and press the seam allowances on the zipper side of both the band and band lining before sewing the top and bottom edges finishing with hand sewing the inner band at the zipper. Instead I simply placed the band lining RSF over the band main fabric, sewed along the perimeter being careful to to hit the zipper teeth and leaving the band side open for turning. That way you can eliminate the hand sewing.

How I shifted the back band at the side bodice

Thankfully I remembered to do another test fit of the bodice before joining the self lining. I had way too much give in the back band. I suppose I should have cut a size 14 bodice instead of a 16. The fix was easy, I simply ripped out the stitches and moved the band over as well as changed the angle pinned and tried it back on. Thankfully my first attempt was pretty much dead on.


EDIT: …or so I thought, I didn’t notice how tight the back band was until I took these pictures. Sigh the disadvantage of looking over your shoulder at a mirror and going by feel. The tightness made me feel supported in the front but it unfortunately caused my back fat to spill out. Next time I will cut a 16 bodice front but a 14 back band and keep the 16 skirt. Carry on….


Next up was the skirt which I was dreading simple because I hate transferring all the marking necessary for pleats and there are quite a few on this skirt. Honestly though once I started I was done in no time. I originally wondered why there was a top and bottom skirt piece, it looked to me like that it could have just one front and back pieces. I believe I understand why now. The top front and back top skirt piece is interfaced and that makes the skirt really stand out. If you cut one piece the fullness of the pleats would be lost. The skirt sewed up in less time than it took me to transfer all the skirt markings.


Since my lining was already finished it was all a breezed from here. I just sandwiched the bodice between the skirt and the skirt lining, understiched the skirt and hemmed. ALL DONE!



Despite my issue with the back band, I love this dress. This linen is absolutely amazing! I love the bright color, the texture, the hand, the weight…everything. Make sure you grab some, it’s perfect for summer dresses, tunics, wide legged pants and more!


Pattern:  Vogue 1546

Pattern Description: Close-fitting, lined halter dress has grosgrain ribbon for neck tie, back band and front and back pleated skirt. Includes separate pieces for A, B, C and D cup sizes.

Sizing: 6-14, 14-22 (I sewed a 16 with some mods)

Difficulty: 3/Intermediate

Fabric Used: Red Designer Linen from Fabric Mart Fabric (sponsored)

Does it look like the photo/drawing on the pattern envelope? Yes

Were the instructions easy to follow? Yes, they were clear

Likes: Halter neckline, back band, open back, pleated skirt, side pocket

Dislikes: None

Pattern alterations or any design changes made: I took in the back band.

Would I sew it again? Yes, I’d like to sew this in a print.

Would I recommend it to others? Yes

Conclusion: Interesting, unique dress pattern.



14 responses to “Red Hot Summer Halter Dress: A Fabricista Post”

  1. I actually don’t see any back fat spilling out. The back of the dress actually looks great. I understand you know how you want to feel in it though. The dress looks great on you.

    Liked by 1 person

      1. I had no idea how to approach this beo-refnow I’m locked and loaded.

        Liked by 1 person

      2. Great! Glad to help!


  2. Oh my goodness! You look wonderful in that dress. I had to have the pattern just picked it up yesterday.

    Liked by 1 person

    1. Thank you. It is definitely one of my faves.


  3. This dress looks perfect on you, great colour choice. You look fabulous!

    Liked by 1 person

  4. This is a knock-out! Great job. I actually just bought this pattern yesterday at Joann’s pattern sale and I can’t wait to sew it up. Despite your concerns about fit in a couple of places, I think this dress fits you very well! I bet you’ll live in this dress this summer.


    1. Thank you! I’d love to see your version.

      Liked by 1 person

  5. […] 2017 patterns as proven by the fact this is the third one I’ve sewn up (See  V9259 and V1546). The recommended fabric is linen which happens to be one of her favorites so using Fabric […]


  6. […] Red Hot Summer Halter Dress: A Fabricista Post […]


  7. […] out now, but I love the linen from Fabric Mart (here) and have used for several garments (here, here, here). Linen in general is great to work with and this was no exception. The slight stiffness of […]


What do you think?

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: